Comparison Of Thermal And Optical Behaviors Of Pre-Molded And Ceramic Package Light Emitting Diodes

Simple item page
dc.contributor.authorLee, Zhi Yin
dc.date.accessioned2019-05-06T03:54:39Z
dc.date.available2019-05-06T03:54:39Z
dc.date.issued2013-07
dc.description.abstractThe project signifies thermal and optical characterizations of pre-molded and ceramic package light emitting diodes (LEDs) that are conducted by using thermal transient and light emission recording techniques. It was observed that the luminous intensity of the LEDs is dependent on the input current. However, the LEDs efficiency is reduced for about 15% with the current increases, which due to the high current density and heating of LED junction. In terms of package-level and system-level, pre-molded package LED shows approximately to 13% and 15% lower in junction-to-case and junction-to-ambient thermal resistances respectively than ceramic package LED. Despite, the heat dissipation of ceramic package LED is improved after mounting on a metal-core board (board-level). Here, the effects of packaging material properties and ratio of contacting surface area are applied. Next, the results shows that the application of thermal compound as thermal interface material yields about 6% lower junction-to-ambient thermal resistance than thermal tape. Further investigation shows that the optimum heat convection for pre-molded package LED in an open-air environment is obtained as the cooling fan facing upward; while in terms of still-air environment, it is achieved as the cooling fan facing downward. Lastly, the accuracy of the captured thermal transient is improved by considering the optical power into the determination of real thermal resistance. In sequence, it was seen that the use of direct current reveals more accurate and reliable measurement results where the occurrence of electrical disturbance is minimized.en_US
dc.identifier.urihttp://hdl.handle.net/123456789/8148
dc.language.isoenen_US
dc.publisherUniversiti Sains Malaysiaen_US
dc.subjectComparison Of Thermal And Optical Behaviorsen_US
dc.subjectPre-Molded And Ceramic Package Light Emitting Diodesen_US
dc.titleComparison Of Thermal And Optical Behaviors Of Pre-Molded And Ceramic Package Light Emitting Diodesen_US
dc.typeThesisen_US
Files
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Pusat Pengajian Sains Fizik - Tesis