Publication:
Effect of post-weld heat treatment On formability and springback Behaviour of aluminum-steel Friction stir welded Blank.

datacite.subject.fosoecd::Engineering and technology::Mechanical engineering
dc.contributor.authorRizlan, Muhamad Zulkhairi
dc.date.accessioned2026-11-11T08:28:02Z
dc.date.available2026-11-11T08:28:02Z
dc.date.issued2025-11
dc.description.abstractAluminum-steel tailor welded blanks are increasingly applied in automotive and shipbuilding, offering lightweight alternatives in less critical sections while improving strength-to-weight ratio and wear resistance. As dissimilar materials are difficult to be joined using typical fusion welding methods, friction stir welding stands out as a promising solution in joining dissimilar materials such as aluminum and steel. Behaviour of dissimilar joint in terms of formability and springback may be different due to the different properties of the materials. Furthermore, the effect of post-weld heat treatment on formability and springback pattern of aluminum and steel joint has not yet been established. This study investigates the effect of post-weld heat treatment on the springback and formability of AA6061-SAE1020 mild steel friction stir welded blanks. Friction stir welding parameters were optimized using the Taguchi method and analysis of variance, identifying an optimal combination of 865 rpm rotation speed, 90 mm/min welding speed, and 0.275 mm plunge depth. Confirmation tests validated the predicted ultimate tensile strength with an error of only 1.27%. The AA6061-SAE1020 mild steel friction stir welded blanks underwent post-weld heat treatment, which consisted of solution heat treatment at 530°C for 2 hours, followed by water quenching, and artificial aging at 160°C for 2, 4 and 6 hours. The thermal exposure during solution heat treatment and artificial aging promoted grain coarsening and stress relief in the AA6061 matrix, with the average grain size increasing from 31 µm in the as-welded condition to 36 µm after 6 hours of aging, while the SAE1020 side exhibited a smaller increase from 19 µm to 21 µm. This moderate grain growth reduced grain boundary density and residual dislocation energy, leading to more uniform elastic recovery and consequently lower springback. Simultaneously, the intermetallic compound layer at the aluminium-teel interface thickened slightly from 1.9 µm to 2.9 µm, remaining within a stable and beneficial range that preserved strong metallurgical bonding without inducing brittleness. The continuous and thin intermetallic compoundlayer enhanced interfacial stress transfer and minimized strain localization, supporting stable deformation during both loading and unloading. These microstructural changes, together with reduced residual stresses and improved mechanical uniformity, facilitated smoother strain distribution and greater deformation compatibility between the dissimilar materials. As a result, the post-weld heat treatment condition demonstrated reduced springback by 43-60% and enhanced formability by 9.5%, confirming that controlled grain coarsening, stable intermetallic compound layer growth, and improved mechanical compatibility collectively enhanced the dimensional stability and deformation performance of AA6061-SAE1020 friction stir welded blanks. The findings of this study provide significant implications for industries such as automotive and shipbuilding, where weight reduction and structural integrity are critical. The demonstrated reduction of springback by up to 60% and the 9.5% improvement in formability highlight the potential of AA6061-SAE1020 friction stir welded blanks with post-weld heat treatment for producing lightweight yet durable components. These outcomes support more accurate forming, reduced tooling costs, and broader adoption of aluminum-steel hybrid structures in industrial applications.
dc.identifier.urihttps://erepo.usm.my/handle/123456789/25415
dc.language.isoen
dc.titleEffect of post-weld heat treatment On formability and springback Behaviour of aluminum-steel Friction stir welded Blank.
dc.typeResource Types::text::thesis::doctoral thesis
dspace.entity.typePublication
oairecerif.author.affiliationUniversiti Sains Malaysia
Files