Publication: Investigation on chemically functionalized corn starch and rice husk filler in polybutylene adipate terephthalate for biodegradable polymer composite.
| datacite.subject.fos | oecd::Engineering and technology::Materials engineering::Materials engineering | |
| dc.contributor.author | Niresha a/p Perumal | |
| dc.date.accessioned | 2026-11-19T07:11:01Z | |
| dc.date.available | 2026-11-19T07:11:01Z | |
| dc.date.issued | 2025-09 | |
| dc.description.abstract | This study focuses on the development of biodegradable composites reinforced with natural fillers, specifically corn starch and rice husk, as a strategy to mitigate plastic waste and support sustainable material innovation. PBAT was selected as the polymer matrix for its excellent mechanical strength and flexibility. However, its relatively high cost and low stiffness limit its direct application, thus the incorporation of natural fillers provides both reinforcement and cost reduction. Corn starch and rice husk, abundantly available agricultural by-products, were incorporated into PBAT to enhance composite performance. Utilizing these wastes not only diverts biomass from open burning or landfilling but also helps to reduce reliance on non-biodegradable plastics. The primary objective is to produce eco-friendly alternatives to conventional plastics by optimizing the mechanical strength and biodegradability of PBAT-based composites through the integration of modified, naturally derived materials. These biodegradable composites were fabricated through the melt blending technique, with a novel emphasis on discovering effective surface modification techniques in enhancing mechanical properties while maintaining biodegradability above 80%. Corn starch was subjected to acetylation, while rice husk underwent alkaline, acetylation, and silane treatments to address the inherent immiscibility between the hydrophobic PBAT matrix and hydrophilic fillers. The addition of sorbitol and maleic anhydride further improved filler-matrix adhesion and mechanical performance. A range of analytical techniques, including Fourier transform infrared (FTIR), scanning electron microscopy (SEM), x-ray diffraction (XRD), tensile testing, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), contact angle measurement, and soil burial test were conducted to evaluate the structure, properties, and biodegradability of the composites. SEM analysis revealed improved interfacial adhesion with homogenous dispersion and reduced voids in surface-treated composites. The PBAT/ACS/MAH composite demonstrated a tensile strength of 15.47 MPa, modulus of 95.30 MPa, and strain at break of 170.81%. Meanwhile, PBAT/Silane RH/MAH composite exhibited superior properties than those PBAT/Alkali RH/MAH and PBAT/Acetylated RH/MAH composites with a tensile strength of 22.49 MPa, modulus of 187.60 MPa and strain at break of 41.83%. Additionally, tensile properties evaluations indicated that for filler loading of 30wt%, a 2% silane concentration is adequate, a maximum of 6% is necessary for 40wt% loading, and a minimum of 4% is essential for 50wt% filler loading. These findings illustrate the potential of utilizing modified polysaccharides fillers in developing cost effective biodegradable materials by varying the filler loading while maintaining high performance for applications such as straws and plastic bags. | |
| dc.identifier.uri | https://erepo.usm.my/handle/123456789/25566 | |
| dc.language.iso | en | |
| dc.title | Investigation on chemically functionalized corn starch and rice husk filler in polybutylene adipate terephthalate for biodegradable polymer composite. | |
| dc.type | Resource Types::text::thesis::master thesis | |
| dspace.entity.type | Publication | |
| oairecerif.author.affiliation | Universiti Sains Malaysia |