Publication:
A rectangular dielectric resonator antenna

datacite.subject.fosoecd::Engineering and technology::Electrical engineering, Electronic engineering, Information engineering
dc.contributor.authorLee, Ai Yieng
dc.date.accessioned2024-09-05T07:27:15Z
dc.date.available2024-09-05T07:27:15Z
dc.date.issued2009-04-01
dc.description.abstractThis undergraduate project proposes the design of a Rectangular Dielectric Resonator Antenna (DRA). The targeted frequency range is between 2GHz and 4GHz with its resonant frequency to be around 3GHz. Besides that, the return loss of the antenna aims to have a return loss lower than -10dB to justify for an efficient antenna feed. The DRA was designed using a low dielectric constant substrate material that is known as RO4003C™. Its dielectric constant is only 3.38. On the other hand, the ceramic dielectric was fabricated using high dielectric constant Bismuth Titanate, Bi3Ti4O12, which has value as high as 90. After fabrication, the antenna is tested for its performance. This was done with the help of measuring equipment in the RF laboratory such as network analyzer and the material analyzer. Comparisons were then conducted to observe the efficiency of the designed antenna. With objective of designing a DRA with 3GHz resonant frequency, the project was completed successfully with the resonant frequency occurring around 2.7GHz both in simulation and measurement results. At the resonant frequency of 2.7GHz, the return losses only differs only 3.4% from each other. Other parameters such as gain, directivity and efficiency achieved a satisfactory value. Thus, the design of the Dielectric Resonator met the desired requirement and is successfully done.
dc.identifier.urihttps://erepo.usm.my/handle/123456789/20388
dc.language.isoen
dc.titleA rectangular dielectric resonator antenna
dc.typeResource Types::text::report
dspace.entity.typePublication
oairecerif.author.affiliationUniversiti Sains Malaysia
Files