Characterisation And Performance Of Sno2 Film For Detection Of Volatile Organic Compounds Synthesised By Chemical Vapour Deposition Method
Loading...
Date
2013-04
Authors
Tan, Xian-Ju
Journal Title
Journal ISSN
Volume Title
Publisher
Universiti Sains Malaysia
Abstract
SnO2 films were successfully coated on alumina substrate by using
tetramethyltin (TMT) as the precursor via chemical vapour deposition (CVD)
technique, to be used as chemical sensor. Characterisation of the films was
performed by using X-ray diffraction (XRD), energy dispersive X-ray spectroscopy
(EDX) and field emission scanning electron microscope (FESEM). The sensor was
optimised by varying parameters such as coating temperature (400 oC - 500 oC),
coating time (30 min - 90 min) and annealing temperature (450 oC - 550 oC). The
optimum coating condition was achieved at coating temperature of 450 oC and
coating time of 60 min without annealing with highest sensitivity of 25.02 towards
500 ppm of ethanol vapour. It was also found that film thickness increased linearly
from 0.31 μm to 16.77 μm as the coating time increased from 30 min to 90 min.
Meanwhile, annealing temperature of 450 oC to 550 oC did not improve the
sensitivity when compared to the sensitivity of the film without annealing. Instead,
an increase of annealing temperature lowered the sensor sensitivity. The results also
showed that response time decreased with increasing ethanol concentration
meanwhile the recovery time increased with increasing ethanol concentration. The
optimised sensor also responded to other volatile organic compounds (VOCs) such as
acetone and methanol vapour.
Description
Keywords
Sno2 Film , Detection Of Volatile Organic Compounds Synthesised