Granulated Blast Furnace Slag In Structural Lightweight Panel For Housing

dc.contributor.authorMahmood, Zaid Shaker
dc.date.accessioned2017-01-26T02:16:43Z
dc.date.available2017-01-26T02:16:43Z
dc.date.issued2016-08
dc.description.abstractGranulated blast furnace slag (GBS) is the main waste material produced by the iron industry. In order to activate as an effective pozzolanic material, GBS needs to be ground. Hence, adding to its value in cost and putting in to its production more energy, and as a result, more gas emissions to the environment. This study aimed on using GBS to be used as partial cement replacement for the production of foam concrete. GBS is used to partially replace cement at replacement levels of 30-70% by weight of cement in a 1300kg/m3 foam concrete mix using three different filler to binder ratios (1.0, 1.5 and 2.0). In order to have a better understanding about the difference in performance between GBS and the widely used enhanced ground granulated blast furnace slag (GGBS), GGBS was used in producing foam concrete using similar density, replacement levels and filler to binder ratios. A total of 36 mixes were prepared and were tested for their physical, mechanical and durability properties at different ages. Results showed that the optimum foam concrete GBS mix was the mix that contained 30% of GBS and with filler to binder ratio of 1.5. This mix was chosen for the fabrication of the outer shell for the precast wall panel. The load bearing wall panel made out of two halves connected together using steel bolts. The outer shells are designed as a ribbed panel and an inner core made out of a 500kg/m3 foam concrete mix. Through the experimental test, the wall panels achieved an average breaking load of 391kN, which is greater by 51.6% in comparison to the theoretical load determined using the ultimate design loaden_US
dc.identifier.urihttp://hdl.handle.net/123456789/3593
dc.subjectGBS to be used as partial cement replacementen_US
dc.subjectfor the production of foam concrete.en_US
dc.titleGranulated Blast Furnace Slag In Structural Lightweight Panel For Housingen_US
dc.typeThesisen_US
Files
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: