Determination of effective source to surface distance for electron beam from siemens primus linear accelerator

dc.contributor.authorPing, Heng Siew
dc.date.accessioned2019-04-28T04:26:36Z
dc.date.available2019-04-28T04:26:36Z
dc.date.issued2004
dc.description.abstractThe aim of this thesis is to determine the effective source surface distance for 6, 9 and 15 MeV electron beam energies generated from Siemens Primus linear accelerator in HUSM. The effective SSD is the distance from the virtual source position to the end of the applicator. The effective SSD is known to depend on beam energy and field size. Different methods of obtaining the effective source surface distance for electron beams have been investigated. The charge measurements were performed using parallel plate ionization chamber in solid water phantom at depth of dmax, using 0, 5, 10 and 15cm air gap. Excel was used to present a plot of [QJQ8 ] 112 versus air gap. The variation of the effective SSD with the energy and field size of measurement was also investigated. Minimum effective SSD was 58.3 em in small field size of 5 em diameter circle applicator and maximum effective SSD was 98.2 em for 25x25 cm2 applicator, with 6 MeV energy. Effective SSDs gradually increased with field size for the same electron energy and decreased again at 25x25cm2 for 6 and 9MeV. Effective SSDs gradually increased with the electron energies. From the results we recommended that the effective SSD should be measured for each energy and field size before clinical use.en_US
dc.identifier.urihttp://hdl.handle.net/123456789/8117
dc.language.isoenen_US
dc.publisherPusat Pengajian Sains Kesihatan, Universiti Sains Malaysiaen_US
dc.subjectSurfaceen_US
dc.titleDetermination of effective source to surface distance for electron beam from siemens primus linear acceleratoren_US
dc.typeThesisen_US
Files
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: