Publication: Synthesis and characterization of calcium salt treated bioactive glass-cordierite ceramic.
Loading...
Date
2025-08
Authors
Tuan Ab Rashid, Tuan Nur Izzah
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Bioactive glass (BG) is widely used in biomedical applications due to its ability to bond with tissue by apatite formation, but its low mechanical strength limits use in load-bearing applications. Incorporating cordierite enhances strength but reduces bioactivity, highlighting the need to balance both properties. In this study, BG Cordierite composites were treated with calcium salts to improve the bioactivity performance. Various types of calcium salts; calcium chloride, calcium acetate, and calcium nitrate tetrahydrate and concentrations (0.1 to 1.25 M) were investigated. BG and cordierite were synthesized using the glass melting method. Prior to composite fabrication, BG was synthesized using two different SiO2 sources; commercial (BGC) and rice husk ash (BGW) to compare bioactivity and mechanical performance. Both BGC and BGW demonstrated comparable bioactivity, though BGC exhibited slightly higher strength, with a diametral tensile strength (DTS) of 10.02 MPa. The BG Cordierite composite synthesized using commercial SiO₂ showed a strength enhancement, achieving a DTS of 31.62 MPa. The composite treated with calcium chloride (BC-CC) demonstrated the most effective enhancement in apatite formation without significant compromising strength, recording a DTS of 31.48 MPa. Further improvement was observed in the sample treated with 1.0 M calcium chloride (1.0BC CC), which achieved a DTS of 32.42 MPa over three times higher than BGC. This sample also exhibited a density of 2.11 g/cm³ and porosity of 25.7%. In-vitro bioactivity analysis was confirmed through scanning electron microscope (SEM), which revealed the formation of coral-like calcium-deficient hydroxyapatite (CDHA) structures as early as Day 1 in simulated body fluid (SBF). X-ray diffraction (XRD) analysis showed apatite peaks, while Fourier transform infrared (FTIR) indicated increased P-O and C-O intensities after soaking, further confirming apatite formation. In conclusion, calcium chloride treated BG-Cordierite composite has potential application for dental implant applications.