Publication: Effect of die thickness and aspect ratio of stacked chip encapsulation of moulded underfill packaging using lattice boltzmann method.
No Thumbnail Available
Date
2017-08
Authors
Ishaik, Mohammad Hafifi Hafiz
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Portable electronic devices such as mobile phone, smart watches and laptop have evolve dramatically over the last few decades. The technology is increasingly drive towards the miniaturization of the integrated circuit (IC) packaging represent in terms of its compactness and high capacity. The current trend towards scaling down of the IC package size that meet today’s advanced processes, maintaining package reliability become increasingly challenging. Therefore, the package components (solder bumps, lead frame, silicon chip) are encapsulated by the encapsulation process as solution to overcome those problems. One of the critical concerns during the encapsulation process is the formation of void in the IC packaging. There are two types of void sizes in the package, which are macro and micro voids. In the application of three dimensional (3D) simulations of encapsulation process, the simulation process poses considerable challenges since the available simulation tools do not accommodate such a micro void—current simulation tools can only simulate for up to macro void. Therefore, the IC encapsulation process considering the mesoscale aspect is the main focus in this research. The simulation was performed by lattice Boltzmann method (LBM) based (Palabos) for the mesoscale analysis. The capability of the software in handling the encapsulation problems has successfully examined through the comparison of the predicted results with previous scholars’ work and current scaled up encapsulation processes. The scaled-up encapsulation processes were fabricated in the transparent mould for better visualization, flow and void formation mechanisms. In the simulation, the Castro-Macosko viscosity model was written into C++ and implemented into Palabos to describe the EMC fluid behaviour. The accurateness of the C++ code has proven its excellency in modelling the rheological fluid behaviour during the IC encapsulation process. In this study, the LBM is capable to capture the micro void with Paraview post- processor. Moreover, the investigations on the capillary underfill and moulded IC encapsulation were extended to the parametric case studies concerning various IC design factors (i.e., solder bump arrangement, shapes, layout, chip thickness, aspect ratio) and processing parameter (i.e., inlet pressure). The effects of these factors on the fluid flow behaviour, void formation, velocity and pressure profile were also highlighted. It was found that processing parameter and design significantly influenced the fluid flow mechanism, void formation, and filling time during the IC encapsulation. The optimum geometrical and process parameters for the encapsulation process were characterized by 3.65 MPa of inlet pressure, 150 µm height of bump standoff, 242 µm of chip thickness and 2 of aspect ratio. The current study was expected to provide valuable guidelines and references for the engineers and IC designers during the IC encapsulation process in microelectronics industry.